How to Fix Error 0x80070035 Windows 10 The Network Path was not Found

How to Fix Error 0x80070035 Windows 10 The Network Path was not Found

Microsoft Windows 10 users can connect a computer to another. The OS also allows sharing the same network to access necessary folders and files without having a cable connection. Unfortunately, some of the users encounter “Error code: 0x80070035, The network path was not found” while trying to connect as a guest.

How to Fix Error 0x80070035 Windows 10 The Network Path was not FoundThis is a very confusing error. Usually, it happens when the network functions as it is designed, but a user types the wrong pathname. Every path should have a valid shared resource on the remote device. Additionally, he must possess permission to access the same resource. However, we can resolve Error 0x80070035 Windows 10 if we did not find the Network Path following few promising workarounds available ahead. Let’s proceed on straightway.

So many technical issues may cause this error to occur. Therefore, we have several methods to fix this obnoxious Error 0x8007003Suppose If you did not find the Network Path. The methods are here:

Method-1: Recheck the Sharing settings

Primarily, you need to make sure that your device is shared properly with the network. To do so, the steps are as follows:

Step-1: Perform a right-click on the desired drive which you want to access and select Properties.

Step-2: Go to the Sharing tab. Check if the network path displays Not Shared. Proceeding forward, click on the “Advanced Sharing” option.

Step-3: On the following Advanced sharing window, check the box for “Share this folder.” In the Settings section, confirm that you have typed the correct drive name. From the bottom of the Advanced sharing window, select Apply and then Ok to save the customizations.

Step-4: Leaving the previous window, press Windows + R shortcut keys to bring up the Run dialog.

Step-5: In the text box, type the folder name and press Enter. Hopefully, you can access the folder properly from now onward.

Method 2: Share using the IP address of the targeted computer

Follow the below workaround if you cannot resolve the Error 0x80070035 Windows 10 method-1 did not find the Network Path.

Step-1: Gently strike on the Windows logo key on the keyboard and type cmd. Right-click on Command prompt showing under Best match and go with Run as administrator.

Step-2: When the UAC prompt covers the computer screen, select Yes.

Step-3: On the Command Prompt window, type the following command at the blinking cursor.

ipconfig /all

Hit Enter when you finish typing.

Step-4: Look for the IPv4 Address scrolling down slowly. Check the following address:

192.168.43.193

Step-5: Press Windows + R shortcut keys again and bring Run dialog in front.

Step-6: In the search box, type the following text and press Enter:

\\192.168.43.193\name of the desired driver you want to access.

Therefore, you should be able to see the drive is opening properly now. If you fail in this case, follow the next method.

Method-3: Checking the Device manager

Step-1: Open the Device Manager with a right-click on the Start button and select “Device manager.”

Step-2: Press View on the menubar of the console and choose Show hidden devices.

Step-3: Have a look at the Network adapters. You find a long list having 6 to 10 adapters, so locate the correct one running with your device. Except the running delete every adapter one by one by right-clicking.

Step-4: Reboot your computer when the 1 adapter is left only. Restart the PC and check the error is already resolved or not.

Method-4:  Add IPv4 protocol over TCP/IP

Step-1: Press Windows & R keys altogether to bring up the Run dialog box.

Step-2:  In the text area, type ncpa.CPL and hit click on Ok.

Step-3: On the following window, select your connection and put a right-click on it. From the list of options, select Properties.

Step-4: After the Network Properties wizard (whether it is wireless or Wi-Fi), locate the box for “The connection uses the following items.” Now, click on “Internet Protocol (TCP/IP) Version 4” from the field. Press the Install button just below this box.

Step-5: Now select “Protocol” and click on Add on Select Network Feature Type wizard.

Step-6: Select Network Protocol pop up comes out, choose Reliable Multicast Protocol, and then OK.

Method-5: Change the Network Security Settings

Finally, you can change the network security setting to resolve Error 0x80070035 who did not find the Network Path. The steps are as follows:

Step-1: Go to the Start menu from your computer, type secpol.MSC in the search bar and then press Enter

Step-2: Click on the option Local Policies and then Security Options from the left section in the subsequent console. Proceeding forward, execute a double click on Network security: LAN Manager authentication level.

Step-3: From the dropdown menu, choose the option “Send LM & NTLM-use NTLMv2 session security if negotiated”. Perform a click on Apply, then Ok to save the modifications.

To check whether the Error 0x80070035 Windows 10 did not find the Network Path in Windows 10 is fixed.

Final remark

For the remotely handling and smooth operation, we need to access the folders from another computer. Microsoft is very keen on the users’ satisfaction. They have provided a way to do it. But unhappily, we often get an error like the Error 0x80070035 Windows 10 when we did not find the Network Path. Luckily, we have got some ways to resolve it. We have discussed the methods clearly. Follow and enjoy!

Leave a Reply

Your email address will not be published. Required fields are marked *